Fixe brand

504 Energy absorber 1 (large) poliamida

Energy absorbers designed for weak anchor points such as micronuts, friends, pitons, ice screws, etc.

EN 566, UIAA 104

Weight: 70 g, Ring strength: 22 kN, Material: 19 mm polyamide, Impact force: 35%

505 Energy absorber 2 (small) poliamida

Energy absorbers designed for weak anchor points such as micronuts, friends, pitons, ice screws, etc.

EN 566, UIAA 104

Weight: 45 g, Ring strength: 22 kN, Material: 19 mm polyamide, Impact force: 20%

014-D Stainless steel glue-in bolt “D” shape

Glue- in bolts are produced with a stainless steel . On fixed process its sharp end enables proper air flow providing a correct and entire distribution of glue inside the hole. The stretch mark around the rod maximize the bolt holding power. The anchors have a capacity for more than one carabiner. Welding is always done by T.I.G and it is tested individually in order to guarantee an optimal quality. Stem length: 8 cm. D10 mm.

Weight: 102 g, Strength: 25 kN, Hole diameter required: 14 mm , CE, EN 959

014-A Stainless steel glue-in bolt

Glue- in bolts are produced with a stainless steel. On fixed process its sharp end enables proper air flow providing a correct and entire distribution of glue inside the hole. The stretch mark around the rod maximize the bolt holding power. The anchors have a capacity for more than one carabiner. Welding is always done by T.I.G and it is tested individually in order to guarantee an optimal quality. Stem length: 8 cm. D10 mm.

Weight: 114 g, Strength: 35 kN, Hole diameter required: 12 mm, CE, EN 959

452 Stainless steel expansion bolt M12x75mm

Our expansion bolts made of zinc–plated highest steel, and of stainless steel as web have been designed exclusively for climbing. In order to guarantee high quality threads, they are inlaid by pressure and not milled, so as not to cause cuts on the steel fibers.

Weight: 91 g, AISI 304

0.013 Hanger Fixe 1

No doubt that hanger Fixe 1 is our most known anchor, with an excellent reputation in the vertical world. It is strong, easy to clip and with a capacity for more than one carabiner. Three small protuberances around the bolt orifice keep the hanger from spinning if it receives lateral forces. Biner lodgement has blunt edges to avoid damaging. Multi-directional hanger with 4 mm stock. Bi-chrome plated steel.

Strength: 15/25 kN, Weight: 66 g

038 Hanger Fixe 1 inox

No doubt that hanger Fixe 1 is our most known anchor, with an excellent reputation in the vertical world. It is strong, easy to clip and with a capacity for more than one carabiner. Three small protuberances around the bolt orifice keep the hanger from spinning if it receives lateral forces. Biner lodgement has blunt edges to avoid damaging. Multi-directional hanger with 4 mm stock.

Strength: 30 kN, Weight: 66 g, AISI 316

391 Lowering station “V” shape plated steel with two rings

Our chains with ring at one end have been conceived to be used as a belay system in multi-pitch routes as well as a rappel stance in speleo, canyonning and difficult descend walls. It is possible to clip any part of the unit with a carabiner which should always have a locking gate. The ring is placed perpendicularly to the wall so that it eases the retrieving of the rope.

Strength: 25 kN, Weight: 525 g, CE, EN 959, EN12572

392 Lowering station “V” shape stainless steel with two rings

Our chains with ring at one end have been conceived to be used as a belay system in multi-pitch routes as well as a rappel stance in speleo, canyonning and difficult descend walls. It is possible to clip any part of the unit with a carabiner which should always have a locking gate. The ring is placed perpendicularly to the wall so that it eases the retrieving of the rope. Available in D10 mm.

Strength: 25 kN, Weight: 525 g, CE, EN 959, EN 12572, EN 795 A1

020 Deadman large

Anchors for fixed ropes and rappels in areas of snow and ice. The use of these anchors requires a sound alpine experience.

Size: 26 cm, Material: anodised duraluminium, Weight: 404 g

021 Deadman small

Anchors for fixed ropes and rappels in areas of snow and ice.The use of these anchors requires a sound alpine experience.

Size: 20 cm, Material: anodised duraluminium, Weight: 240 g

430 Snow picket